The Polar Air Universal Floor Standing fan coil units suit applications that require units to be floor standing or ceiling mounted.
The range offers 3 row coils for 2 pipe installations and electrical heater accessory modules that can be easily fitted. The units allow easy access to the motor for maintenance, without needing to be removed once installed.
The floor standing series offers a range of EC motor 230V/50Hz ranges.
The series offers standard nylon net filters and interchangeable left and right coil connections.
|Structure & Cabinet||Made of galvanised sheet steel designed to be attached to the wall or the ceiling, with fire resistant thermo-acoustic insulation internally fitted. Installation can be vertical or horizontal due to the “V” type drain pan accessory.|
|Water Coil||Seamless copper tubes and headers mechanically expanded into corrugated aluminium fin material for a permanent primary to secondary surface bond. Tested at 35 bar with maximum operating limits at 20 bar.|
|Fan||Centrifugal type fan with double air inlet blades made of forward curving metal fins with large diameters. Creates high airflow and high static pressure, with fewer revolutions resulting in lower noise levels.|
|Filtration||Metal frame G2 efficient air filter, easy to remove and clean by rinsing with water or by gently vacuuming. G4 efficiency filter is optional.|
|Air Grille Distribution||The metal cabinet has an ABS air discharge grille (only for PFWBC models), supplied with small side doors for easy access to the control panel.|
PFWB & PFWBC Model
3 Speed Motor
The unit encompasses a 3 speed motor with a centrifugal fan which is statically and dynamically balanced.
PFWB-ECM &PFWBC-ECM Model
Flexibility for distribution and maintenance
Removable front cover for easy maintenance